Features:
|
Bread Board
|
Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280
tie points and 4 Distribution Strips with 100 tie points each, totaling to 1680 tie points. Size:112mm
x 170mm approx)
|
Regulated DC Power Supply
|
+5 V at 1 Amp, -5 V at 1Amp, +12 V/ 0 to 20V at 500mA, and -12 V/ 0 to -15 V at 500 mA
|
AC Supply
|
5-0-5V, 10-0-10V at 100ml. Can be used as 5V, 10V, 15V, 20V, and also as center tap
|
Function Generator
|
Sine/ Square/ Traingular waveform frequency 1 Hz to 110 KHz in 5 Steps. Variable in between
steps. Sine/ Square/ Traingular waveform output 50mV ~ 10Vpp variable
|
Clock Generators
|
0.1Hz and 100 Hz, Independent fixed TTL 5V outputs
|
Variable Clock Generators
|
low frequency variable clock 1 Hz to 10 Hz Fixed TTL 5V output
|
Pulser Switch
|
2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the
counter after every clock pulse)
|
Data Switch
|
16 independent buffered logic level inputs to select High/ Low TTL levels, each with a LED to
indicate high/ low status and termination
|
Logic Indicators
|
16 independent buffered logic level indicators for High/ Low status indication of digital outputs
|
Speaker
|
8 ohms miniature speaker with terminations
|
Digital meter (3½ Digit)
|
Dual range DC Voltmeter 0-20V/ Ammeter 0-200mA
|
Continuity Tester
|
For testing the continuity. Provided with Beeper Sound
|
Potentiometers
|
6 Potentiometers (1K, 22K, 47k, 100K, 100K and 1Meg) with terminals
|
BNC to banana adapter
|
2 Nos. BNC to 2 channel banana adapter
|
Computer interface
|
Facilities connecting your trainer to either Rs232 communication port of PC ADAPTER using 25 pin
(male) connector through 25 nos. of 2 mm banana sockets
|
On Board Switches
|
2 Switches singal pole double through
|
Connecting terminals
|
2/ 4 connecting terminals
|
Seven segment LED Display
|
2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals
|
LED Bar Graph
|
With 10 LED Indicators and 20 termination
|
Logic Probe
|
Logic level indicator for TTL/CMOS
|
Power
|
230 V ± 10%, 50 Hz
|
Accessories
|
Mains cord, Operating and Experimental manual, Red & Black patch cords (2mm with Pin) 10 each,
Red & Black patch cord (Pin to Pin) 10 each & Component Set
|
Instruction manual
|
Strongly supported by detailed operating instructions
|
